PVC windows and doors
Publish:Windowsir | Post time: Monday, November 16, 2009
PVC windows and doors PVC windows and doors are PVC plastic doors and windows have been ene (UPVC) resin as the main raw material, plus a certain percentage of stabilizer, coloring agents, fillers, UV absorbers, etc., after extrusion into a profile, and then cutting, welding or screw means access door window frames made of fans, equipped with the seal strip, top, hardware and so on, at the same time enhance the profile of the rigid, more than a certain length of the profiles cavity fill plus steel liner (ribs), so a gateway made of windows, known as PVC doors and windows.
Performance and characteristics of PVC doors and windows
1. Thermal insulation properties of PVC doors and windows
Plastic-steel windows and doors for the multi-cavity structure, with good insulation properties, the heat transfer performance is very small, only steel l/357, aluminum 1 / 250, showing that plastic door and window insulation, thermal insulation results are obvious, especially for with heating the building more suitable for a modern air-conditioning. Comparing the relevant departments to investigate, namely: the use of plastic doors and windows of the room than the use of wood doors and windows in winter indoor temperature can be 4-5 degrees higher; the northern region the use of double-glazed better effect. It is built NARL Physics test, a single glass steel, aluminum windows of the heat transfer coefficient 64W/M2K; single glass plastic window so the heat transfer coefficient 47W/M2K; ordinary double-glazed steel, aluminum windows of the heat transfer coefficient yes 3. 7W/M2K around; while DOUBLE GLAZING plastic steel window heat transfer coefficient of about 2. 5W/M2K. Building the external doors and windows accounts for 30% of the area of retaining structure, which accounted for 49% of heat, can be seen, plastic-steel windows have a good energy efficiency.
2. Physical properties of PVC doors and windows
Plastic-steel windows and doors of physical properties mainly refer to: PVC plastic doors and windows of the air permeability (air tightness), rain water permeability (water tightness), wind resistance and thermal insulation and sound insulation properties. As the plastic window and door profile has a unique multi-chamber structure, and formed by the welding process windows and doors, PVC doors and windows installed in all the gaps are equipped with doors and windows seal strip and top, so has good physical properties.
3. Corrosion-resistant steel doors and windows:
Plastic-steel windows and doors because of its unique formula which has good corrosion resistance, followed by the plastic-steel windows hardware corrosion resistance depends on the use of metal parts under normal circumstances for the fabricated metal products, and corrosive environment of the industry, such as food , medicine, health, chemicals and coastal areas, wet and humid areas, use corrosion of metal parts (plastic), it is the service life is 10 times the plastic doors and windows.
4. Steel doors and windows weather resistance:
Plastic-steel windows and doors with special formulations, raw materials to add UV absorbers, and low temperature impact resistance agent, thus enhancing the weathering steel doors and windows. Long-term use in the temperature climate, the environment, in a 30 degree to 70 degrees, sun, heavy rain, dry, wet the changes, no discoloration, degeneration, aging, embrittlement and so on. Plastic-steel windows of the examples in Western Europe for three decades, its materials are well preserved.
5. Steel fireproof doors and windows:
Plastic-steel windows and doors are not spontaneous, non-combustion from the fire self-extinguishing, safe and reliable, in line with fire safety requirements, this performance also expanded the use of plastic doors and windows.
6. PVC door and window insulation
The use of plastic doors and windows profiles excellent electrical insulator, non-conductive, high safety factor.
7. Plastic doors and windows tightness:
Steel doors and windows meticulous quality smooth, quality inside and outside the consensus without the need for exceptional treatment the surface, easy processing, after cutting, welding process, the doors and windows finished length, width and diagonal are able to within plus or minus 2MM, processing accuracy, c. strength up to more than 3000N.
8. Plastic-steel windows and doors of the acoustic properties of
Mainly accounted for about 80% of the glass area of the acoustic effects, acoustic steel doors and windows on the market some products under the principle of acoustic resonance transmission and coupling co-operation with different glass composite structures, such as plastic insulating glass windows, ordinary double-glazing enhance the effect of door and window insulation. In the door structure, use of high-quality tape and plastic sealing parts used to make plastic-steel door and window sealing performance results are obvious.
9. Plastic-steel windows and doors look good
And China's meet the requirements of the decorative effect, but also to Human Exposure to feel comfortable than metal. As the steel windows and doors more than some of the outstanding advantages of being a large number of applications in China has become the new trend in the construction sector.
Benefits of PVC doors and windows
Doors and windows are construction to maintain the structure of the important part of residential windows and doors are usually installed into wood doors and windows, iron doors and windows, aluminum windows and doors, PVC doors and windows of four, the most advanced course ought to PVC doors and windows . Plastic-steel windows and doors have just developed a new energy-efficient doors and windows. Use of plastic doors and windows, interior heat loss than other materials, the outflow much less the doors and windows, energy-saving insulation effect is very noticeable. Plastic doors and windows with UPVC material, lined with carbon steel keel, extrusion molding, after cutting, welding, coupled with hardware and rubber sealing strips are made. Because lined carbon steel keel and therefore I have lent their names. Plastic doors and windows of several windows and doors not only combines the advantages of the former, but also superior. Steel doors and windows clean, light, open and flexible, simple and generous appearance, anti-aging, high-quality plastic-steel windows and doors can live for more than 30 years. In addition, plastic-steel windows and doors also has a flame-retardant, high strength, superior sealing characteristics.
Identification of the quality of the user an easy way to steel doors and windows
U-PVC plastic doors and windows is a new type chemical building material, following the wooden doors and windows, steel windows and doors, aluminum doors and windows after the fourth generation of energy-saving windows and doors is the country's Ministry of Construction recommended high-quality energy-saving products. Plastic-steel windows and doors is to use plastic profiles by cutting, and put on strengthening the steel after the welding, and then loaded sealing strips, top, metal parts and other accessories made of.
Because of its beautiful appearance, high corrosion resistance, water tightness and insulation is good, easy maintenance, etc., more and more people of all ages. An extremely rapid development momentum in recent years, however, is also easy to divert attention from growing so fast that many hidden problems. And the market was mixed, what quality levels are generally not enough customers to understand its performance, in the absence of any detection tool, not familiar with its performance, especially on how to identify the quality of plastic doors and windows method does not control the case of purchase It can be cheated. 66560 home network for this special offer to customers how to identify the quality of plastic doors and windows easy way for customers to purchase products for reference.
Broken bridge aluminum-plastic composite windows and doors with insulated glass, aluminum, and hollow, fake European-style structure, beautiful shape, with energy-saving, sound insulation, Fangzao, dust-proof, waterproof function. Such doors and windows of the thermal conductivity coefficient K value of 3W/m2 · K less, than ordinary doors and windows to reduce heat loss by half, reducing heating costs by about 30%, noise amounted to 29 db or more, water tightness, air tightness good, covering a National standards for A1 class window. Local profile of new energy-saving windows and doors profiles
Performance and advantages:
1. Insulation is good: aluminum plastic composite profiles of the low thermal conductivity, excellent heat 1250 times better than aluminum, coupled with good air tightness, in the cold region, albeit a few dozen degrees below zero outside, but indoors is another world.
2. Sound good: its structure was designed seams tight, test results, noise 30db, the relevant standards.
3. Shock: As the outer surface of aluminum-plastic composite profiles of aluminum alloy, so it more than PVC window profiles much stronger impact resistance.
4. Airtightness is good: plastic composite windows were installed at the aperture multi-channel or tape sealed tops, air tightness of a, can take advantage of air conditioning to be paid, and save 50% energy.
5. Watertight good: Water-proof windows and doors designed structure will be completely cut off from rain in the outdoors, water tightness in line with national standards.
6. Fire is good: Aluminum alloy metal material, not burn.
7. Security is good: aluminum-plastic composite windows, configuration, hardware accessories and high quality decorative locks so thieves do nothing 8. Maintenance-free: aluminum-plastic composite profiles are less vulnerable to acid-base erosion, will not turn yellow fade, almost no maintenance. Dirty, it can add Detergent scrub water, washed clean as ever.
9. Best Design: aluminum composite window is the result of scientific design, energy-saving profiles using reasonable and therefore the authority of the State Department's recognition and praise for building more colorful.
Performance and characteristics of PVC doors and windows
1. Thermal insulation properties of PVC doors and windows
Plastic-steel windows and doors for the multi-cavity structure, with good insulation properties, the heat transfer performance is very small, only steel l/357, aluminum 1 / 250, showing that plastic door and window insulation, thermal insulation results are obvious, especially for with heating the building more suitable for a modern air-conditioning. Comparing the relevant departments to investigate, namely: the use of plastic doors and windows of the room than the use of wood doors and windows in winter indoor temperature can be 4-5 degrees higher; the northern region the use of double-glazed better effect. It is built NARL Physics test, a single glass steel, aluminum windows of the heat transfer coefficient 64W/M2K; single glass plastic window so the heat transfer coefficient 47W/M2K; ordinary double-glazed steel, aluminum windows of the heat transfer coefficient yes 3. 7W/M2K around; while DOUBLE GLAZING plastic steel window heat transfer coefficient of about 2. 5W/M2K. Building the external doors and windows accounts for 30% of the area of retaining structure, which accounted for 49% of heat, can be seen, plastic-steel windows have a good energy efficiency.
2. Physical properties of PVC doors and windows
Plastic-steel windows and doors of physical properties mainly refer to: PVC plastic doors and windows of the air permeability (air tightness), rain water permeability (water tightness), wind resistance and thermal insulation and sound insulation properties. As the plastic window and door profile has a unique multi-chamber structure, and formed by the welding process windows and doors, PVC doors and windows installed in all the gaps are equipped with doors and windows seal strip and top, so has good physical properties.
3. Corrosion-resistant steel doors and windows:
Plastic-steel windows and doors because of its unique formula which has good corrosion resistance, followed by the plastic-steel windows hardware corrosion resistance depends on the use of metal parts under normal circumstances for the fabricated metal products, and corrosive environment of the industry, such as food , medicine, health, chemicals and coastal areas, wet and humid areas, use corrosion of metal parts (plastic), it is the service life is 10 times the plastic doors and windows.
4. Steel doors and windows weather resistance:
Plastic-steel windows and doors with special formulations, raw materials to add UV absorbers, and low temperature impact resistance agent, thus enhancing the weathering steel doors and windows. Long-term use in the temperature climate, the environment, in a 30 degree to 70 degrees, sun, heavy rain, dry, wet the changes, no discoloration, degeneration, aging, embrittlement and so on. Plastic-steel windows of the examples in Western Europe for three decades, its materials are well preserved.
5. Steel fireproof doors and windows:
Plastic-steel windows and doors are not spontaneous, non-combustion from the fire self-extinguishing, safe and reliable, in line with fire safety requirements, this performance also expanded the use of plastic doors and windows.
6. PVC door and window insulation
The use of plastic doors and windows profiles excellent electrical insulator, non-conductive, high safety factor.
7. Plastic doors and windows tightness:
Steel doors and windows meticulous quality smooth, quality inside and outside the consensus without the need for exceptional treatment the surface, easy processing, after cutting, welding process, the doors and windows finished length, width and diagonal are able to within plus or minus 2MM, processing accuracy, c. strength up to more than 3000N.
8. Plastic-steel windows and doors of the acoustic properties of
Mainly accounted for about 80% of the glass area of the acoustic effects, acoustic steel doors and windows on the market some products under the principle of acoustic resonance transmission and coupling co-operation with different glass composite structures, such as plastic insulating glass windows, ordinary double-glazing enhance the effect of door and window insulation. In the door structure, use of high-quality tape and plastic sealing parts used to make plastic-steel door and window sealing performance results are obvious.
9. Plastic-steel windows and doors look good
And China's meet the requirements of the decorative effect, but also to Human Exposure to feel comfortable than metal. As the steel windows and doors more than some of the outstanding advantages of being a large number of applications in China has become the new trend in the construction sector.
Benefits of PVC doors and windows
Doors and windows are construction to maintain the structure of the important part of residential windows and doors are usually installed into wood doors and windows, iron doors and windows, aluminum windows and doors, PVC doors and windows of four, the most advanced course ought to PVC doors and windows . Plastic-steel windows and doors have just developed a new energy-efficient doors and windows. Use of plastic doors and windows, interior heat loss than other materials, the outflow much less the doors and windows, energy-saving insulation effect is very noticeable. Plastic doors and windows with UPVC material, lined with carbon steel keel, extrusion molding, after cutting, welding, coupled with hardware and rubber sealing strips are made. Because lined carbon steel keel and therefore I have lent their names. Plastic doors and windows of several windows and doors not only combines the advantages of the former, but also superior. Steel doors and windows clean, light, open and flexible, simple and generous appearance, anti-aging, high-quality plastic-steel windows and doors can live for more than 30 years. In addition, plastic-steel windows and doors also has a flame-retardant, high strength, superior sealing characteristics.
Identification of the quality of the user an easy way to steel doors and windows
U-PVC plastic doors and windows is a new type chemical building material, following the wooden doors and windows, steel windows and doors, aluminum doors and windows after the fourth generation of energy-saving windows and doors is the country's Ministry of Construction recommended high-quality energy-saving products. Plastic-steel windows and doors is to use plastic profiles by cutting, and put on strengthening the steel after the welding, and then loaded sealing strips, top, metal parts and other accessories made of.
Because of its beautiful appearance, high corrosion resistance, water tightness and insulation is good, easy maintenance, etc., more and more people of all ages. An extremely rapid development momentum in recent years, however, is also easy to divert attention from growing so fast that many hidden problems. And the market was mixed, what quality levels are generally not enough customers to understand its performance, in the absence of any detection tool, not familiar with its performance, especially on how to identify the quality of plastic doors and windows method does not control the case of purchase It can be cheated. 66560 home network for this special offer to customers how to identify the quality of plastic doors and windows easy way for customers to purchase products for reference.
Broken bridge aluminum-plastic composite windows and doors with insulated glass, aluminum, and hollow, fake European-style structure, beautiful shape, with energy-saving, sound insulation, Fangzao, dust-proof, waterproof function. Such doors and windows of the thermal conductivity coefficient K value of 3W/m2 · K less, than ordinary doors and windows to reduce heat loss by half, reducing heating costs by about 30%, noise amounted to 29 db or more, water tightness, air tightness good, covering a National standards for A1 class window. Local profile of new energy-saving windows and doors profiles
Performance and advantages:
1. Insulation is good: aluminum plastic composite profiles of the low thermal conductivity, excellent heat 1250 times better than aluminum, coupled with good air tightness, in the cold region, albeit a few dozen degrees below zero outside, but indoors is another world.
2. Sound good: its structure was designed seams tight, test results, noise 30db, the relevant standards.
3. Shock: As the outer surface of aluminum-plastic composite profiles of aluminum alloy, so it more than PVC window profiles much stronger impact resistance.
4. Airtightness is good: plastic composite windows were installed at the aperture multi-channel or tape sealed tops, air tightness of a, can take advantage of air conditioning to be paid, and save 50% energy.
5. Watertight good: Water-proof windows and doors designed structure will be completely cut off from rain in the outdoors, water tightness in line with national standards.
6. Fire is good: Aluminum alloy metal material, not burn.
7. Security is good: aluminum-plastic composite windows, configuration, hardware accessories and high quality decorative locks so thieves do nothing 8. Maintenance-free: aluminum-plastic composite profiles are less vulnerable to acid-base erosion, will not turn yellow fade, almost no maintenance. Dirty, it can add Detergent scrub water, washed clean as ever.
9. Best Design: aluminum composite window is the result of scientific design, energy-saving profiles using reasonable and therefore the authority of the State Department's recognition and praise for building more colorful.
Publish:Windowsir | Category:PVC window | Commentary:0 | Trackback:0 | Browse:
| TrackBackTrack back
- Articles related:
Post comment
◎welcome to give out your point。